Installation Connection with the PC

  1. Set on your laptop
    [Control Panel → Network and Sharing Center → Change adapter settings → Local Area Connector → Properties → Internet Protocol Version 4 (TCP/IPv4)]
    IP adress: 17.91.23.1
    Subnet mask: 255.255.224.0
    Default gateway: 17.91.1.2
  2. Connect the jumper to the connector. (*Install Jumber is required)
  3. Connect the LAN cable between Q.HOME+ ESS-G1 3.6 and LaptopTurn the power on (AC grid On) and start the PV Software On.
  4. Turn the power on (AC grin ON) and start the PV Software On.
  5. Access to SIM (System Install Manager) http://17.91.23.196:8000
  6. Install the settings.
  7. Turn the power Off (AC grid Off) and PV Software off → Remove Jumper Wire
  8. Connect Internet LAN Cable
  9. Turn the power On (AC grid On) and PV Solftware On
Back

Page 17 of 18

Forward